How To Remove Stuck Oil Filter Cap

Ofttimes, oil filters become stuck, making them extremely difficult to unscrew by hand. This normally happens either because people practise non oil the gasket before installation or because they over tighten the oil filter when installing information technology. Either mode, here are three recommendations on how to remove a stuck oil filter if yous notice yourself dealing with a stubborn filter in the future.

How To Remove A Stuck Oil Filter

1. Endeavour to Unscrew The Filter past Hand

Commencement, you will want to endeavor loosening the oil filter by hand. Brand sure that your easily are non oily or glace and that you lot can become a business firm grip on the stuck oil filter. You can habiliment gloves with a non-slip grip to become a meliorate hold on the oil filter. As always, be careful with hot filters, and remember to always turn the filter to the left to unscrew it.

2. Use a Specific Tool to Unscrew The Filter

If your filter is stuck and you tin not unscrew it past hand, you lot may demand a specific oil filter wrench or oil filter cap to remove it. A few boosted tools that might work are adaptable oil wrench pliers, chain wrenches, band wrenches, or jaw wrenches.

Using your tool of choice, y'all should be able to get a expert grip on the filter to unscrew information technology. Be careful about crushing the cylinder depending on the method and tool you are using. Annotation that you will need to employ a decent amount of torque to make any headway with a really stuck filter.

iii. Use a Screwdriver And Hammer

If none of the above works, equally a last resort y'all can use a screwdriver and a hammer. Though less than ideal, this method is usually constructive; but be aware that it is messy. Using the screwdriver (preferably an one-time i that you lot aren't attached to), make a pigsty in the dorsum of the filter torso past hitting the screwdriver in with a hammer. Once the screwdriver pierces the metallic canister from 1 side to the other, you should be able to use it as a handle to rotate and remove the filter.

Avert Hereafter Stuck Oil Filters

Of grade, once you lot have figured out how to remove a stuck oil filter, you don't desire to cause the aforementioned problem again. Be sure you appropriately install your new oil filter. Don't skip over the step of lubricating the gasket with a low-cal layer of fresh oil. And make sure you don't overtighten the new filter. It should fit snugly upward to the engine block, only y'all don't need to crank it tight.